Using FTP on the SSA3000X Plus, SSA3000X-R, and SVA1000X

While you can copy files back and forth from the analyzer to a computer using a USB drive, you may find it more convenient to retrieve files containing measurement data, EMI limit files, cal files, and screenshots from the analyzer by using Windows File Explorer FTP.  

Make sure that the installed Uboot-OS version is 3.3.2 or higher and the Software version is 6.3R2 or higher. (Example SSA3075X-R)

If needed, use this link to download a zip file containing Uboot-OS version 3.3.2

https://mega.nz/file/fVtikRyD#9Ks5FqHaSdBUfqivG_pSlGhPPwbyiC7WXQjoCvucTC0

Unpack the zip file and put it into the root folder of a FAT-32 formatted USB drive. Please try to use one that is smaller than 16 GB in size. Plug the drive into the analyzer and reboot it.

Check that the FTP Status is On

Press System on the front panel, then touch Interface to navigate to the Interface menu

The local directory of this example analyzer is initially empty.

After saving some files, it might look like this:

Ready to Connect by FTP

Type ftp:// with the analyzer IP address into the Windows Explorer box, as shown

Or type:

          ftp://<analyzer address>/local

to navigate directly the file folder

Copy and Paste the files from the analyzer to a new folder or location. To move the files, use Copy and Paste, then Delete them from the analyzer. 

Once connected by FTP, the files may also be written to the analyzer. FTP can be used to transfer files from the computer to the local folder on the analyzer.