SDM3065X 10A Current Fuse Replacement
Ian Sanford
Last Update 21 days ago
Note: Opening your SDM3065X could void the warranty. Please contact [email protected] before performing this service.
To locate the fuse, first the case must be opened.
1. Rotate the handle to the upright position and remove it by pulling outward where the handle meets the case.
2. Remove the small screw located on the underside of the case.
3. Remove the rear feet. There are 4 screws, two on each side.
4. Once the rear feet are removed, slide the case upward to remove. Once the case is opened you can find the fuse location in the image below.
5. To remove the fuse cover, pry up gently on one side.
6. Once the fuse cover is removed, pry up gently from underneath the fuse to release it.
Installation is the reverse of the removal. Replace with Littelfuse T12AH250V.