How Do I Know Which Options Are Installed On My Siglent Instrument ?
This is a guide to finding the add-on options on your instrument to check whether or not they are enabled.
Jim Wilson
Last Update setahun yang lalu
WAVEFORM GENERATORS
SDG800X, SDG1000X, SDG1000X Plus, SDG2000X
No add-on options
SDG6000X
Press the Waveforms button on the front panel, then press Page to view page 2/2. If the IQ option is installed, the button icon shown below is displayed in the waveform menu .
SDG7000A
Press the UTILITY button on the front panel to display the System menu.
Then touch Options to display the status of the add-on options.
No add-on options
Press the Utility / Menu option on the touch screen and select Software Options. ( or Utility button on SDS2000X Plus and SDS5000X front panel)
SDS6000A, SDS7000A
Press the Utility button on the front panel or the Utility / Menu option on the touch screen and select Software Options.
VECTOR NETWORK ANALYZERS
SNA5000A
Press the System button on the front panel to display the Utility menu. Make sure touch screen is active; press Touch on the front panel to turn on the touch screen. Then choose Options.
Touch License.
Move the bar up or down to see the complete list.
SHA850A
Press the Menu button on the front panel, then select System.
On the System menu select Service. On the Service menu select Option.
SSA3000X Plus, SSA3000X-R, SVA1000X
Press the System button on the front panel, then press System Info on the System menu.
SSG5000A
Press the UTILITY button on the front panel to display the System menu.
Then touch Option to display the status of the add-on options.
