Setting up a SPS5 Power Supply
Joel Roop
Last Update pred enim letom
How do I set the Supply to be in Voltage or Current Mode
Front Panel Menu Key > Configure > Operating Mode > Mode
Press Rotary Switch and rotate to set black background to desired value PRESS Rotary Switch again
How do I change the input Value for Volts or Amps
Press the front Panel ESC button until screen showing the V and Amp
Toggle the front Panel SET switch to move between Volts & Amps
The Horizontal arrows on the front panel move the decimal
The rotary knob changes the digit
How do I set the internal resistance of the supply
Note: The output must be off to make the adjustment
Menu > Configure > Operating Mode > Output_Res
How do I connect/disconnect the supply’s shunt resistance
Menu > Configure > shunt
Press knob and rotate until black background behind desired value Press knob again
How do I set the Output Delay
Menu > Configure > output delay
press knob and rotate black background to desired value Press knob again
How do I enable the external ON/OFF switch
Menu > Configure > EXT on/off
press knob and rotate black background to desired value Press knob again