SPS6000X Analog Cables
Connecting instruments externally
Chris Armstrong
Last Update pred enim letom
The SPS6000X has 2 analog cable connections on the rear. These are standard ribbon cable connections. The Analog interface is a 20 pin connector and the analog share port is a 5 pin dual connector. The share connector is used to connect instruments for parallel or serial mode like so:
Up to 2 units can be in series and up to 5 in parallel. The analog interface is used for automation and signaling purposes. The pinout is:
Standard ribbon cables purchased from any electronics supplier can be used here. For more information, review the SPS6000X User's Manual.